Having sewn quite a bit with knits recently, I thought I'd share a tip on changing overlocking thread. I always go for a tone match rather than an actual colour match with overlocker thread e.g. charcoal grey thread for dark fabrics and off white for light fabrics. This works perfectly for seam finishing, as the overlocking threads are all on the inside of the garment. But what about when you're actually sewing seams with your overlocker rather than just finishing the edges? There's a likelihood that the thread could show through the seam line on the right side of the garment, so a vague nod towards light or dark isn't going to cut it, especially with a strong colour such as red.
Here's my tip - I only change ONE cone. The thread for the LEFT needle is the only one that shows through on the right side of the garment, so that's the one you should match up to your garment colour. If, like me, you have a Brother 1034D overlocker, you simply change the cone on the far left (the YELLOW dial), which corresponds with the left needle.
Here's an inside view of the overlocked seams from my Coco top which I made this way. The majority of the overlocked seams are off white, but that's fine because nobody will see them.
| The inside view has an almost invisible row of red stitches at the seam line. |
And here's the outside when the seams are stretched. Look - lovely red matching thread!
It's not necessarily the time it takes to change all four thread cones that I object to, it's the expense of having to shell out for four cones, especially if it's a colour you're not likely to sew with very often. Does anybody else do this? For a lot of you, this is just second nature, but if you haven't come across this tip before, I hope it's helpful. x





